Adding Access Rights

This section describes how to add access rights to iLOQ Locking System.

Create the access rights according to the locking plan devised together with the end customer.

Note:

Create the access right groups one by one. See Access Rights.

If you also want to create lock-specific, individual access rights, create them as a batch operation after you have added the locks, but not yet programmed them. See Adding Individual Access Rights to Locks.

Note:

Required fields are marked with an asterisk (*).

Proceed as follows.

  1. Select Additional data > Browse access rights.

  2. Select Add access right.
    The Adding of access right wizard is opened.
  3. Select Add access right.
  4. Name the access right.
    Tip:

    Typically, the first access right is for the entire premises, and is called, for example, "Master access".

  5. Enter a description for the access right. For example, "Access to all premises".
  6. Select whether a conditional access is used for the access right by checking or unchecking the Conditional access active check box.

    For more information on conditional access rights, see Access Rights.

  7. Enter a more detailed description for the conditional access right.
  8. Select whether the access right will, by default, be added to new locks by checking or unchecking the Add to new locks by default check box.
    Tip:

    If you are creating a system-wide master key access right supposed to be in all locks, choose Yes. In this way, you will never forget to add the access right to new locks.

  9. Select visibility for the access right.

    For more information on access right visibility, see Access Rights.

  10. Select the access right type.

    For more information on access right types, see Access Rights.

  11. Click Next.
  12. A summary window is displayed.
  13. Click Ready.
  14. Click Close.