Adding Monitored Doors

This section describes how to define an input, to which the door contact is connected, as a monitored door.

Proceed as follows.

  1. Select Administration > Browse network modules.

  2. Select the network module, which has the Door Modules, with DOOR STATUS connections, connected.
  3. Right-click to select Edit relay settings.

    The Edit network module relay information window is opened.

  4. Select the Inputs tab.
  5. Select the In use check box for the input that you want to define as a monitored door.
  6. Enter a Door name for the input.

    This is the name that will be shown in the Monitored doors grid view.

  7. Select Save and close.