Using Estates

This section describes how to filter information according to an estate on iLOQ Manager.

You can select the desired estate to filter out unnecessary data from other estates.

Proceed as follows.

  1. When you log in, click the arrow button in the Select estate field.
    Figure: Selecting the Estate
    Selecting the Estate
  2. Select the desired estate with your mouse.
  3. The object list is narrowed down according to the selected estate.
  4. If necessary, repeat this procedure until the desired estate branch is selected.
  5. Now, the various views show data based on the selected estate.
    Tip:

    Log out and login before you change the estate to close all the open tabs. In this way, all the opened tabs will always be related to the latest selected estate.

    If the estate selection for an open tab differs from the latest selected estate, the estates in the Select estate field are shown in red letters.

    Figure: Estate Conflict
    Estate Conflict

    In this case, close the tab and open it again, to view data based on the latest selected estate.