iLOQ Online System and Devices
Installation and usage instructions for the iLOQ Online system and various iLOQ devices
- iLOQ Online System
- Bus Addresses and Bus Termination
- Deploying the iLOQ Online System Hardware
- Software and Firmware Updates
- Troubleshooting
- Programming Keys
  - Programming Key Indication Lights and Connectors
  - Installing Drivers Manually
    This section describes how to install drivers manually if they are not installed automatically by Windows Update.
  - Pairing the Programmer with the PC over Bluetooth
    This section describes how to pair the Programmer with the PC over Bluetooth.
  - Adding Programming Keys
  - Updating the Programming Key Firmware
- Recycling of Decommissioned Products

Programming Key Indication Lights and Connectors

Programming key indicator light color codes are presented in more detail in the table below:

Table 1. Programming Key Indicator Light Color Codes
Light colour	Description
Rose	Connection to the Manager has been established.
Red	No connection to the Manager.
Orange	Programming.
Blinking green	Programming finished.
Orange → red	Programming failed.

The connectors on the Programming adapter are:

A USB connector for connecting the Programming cable with the Programming adapter.
A USB connector for connecting the Programming adapter with the PC.