N501 4G Door Module

The Door Module is a standalone door module installed in the vicinity of a door. The module controls devices installed in the door, such as lock cylinders, RFID readers, electronic locks, electric strike plates, magnetic locks, etc.

The Door Module is connected to the server by means of a 4G connection. The Door Module has several different use cases and can be used with or without programming, as needed.

The most common use cases:

  • Connecting the lock cylinder to a remote control system.
  • Electronic lock calendar control.
  • Electronic lock control with RFID reader.
  • Alarm system control with RFID reader.
  • Electronic lock control with an RFID key and PIN code combo.
  • Electronic lock control with a code.

The Door Module is intended for installation in dry indoor air conditions. If the Door Module needs to be installed outdoors, for example to control a gate, make sure the module is not exposed to rain.

The Door Module is presented in the figure below.

Figure 1. N501 4G Door Module
N501 4G Door Module