Administration Guide
Administering the iLOQ 5 Series locking system
- Installations
- Logging In to iLOQ Locking System
- User Interface
- Common Administration Tasks
- Dashboard
- Front Page
- Locks
- Keys
  - Browsing Keys
    This section describes how to view key information on iLOQ 5 Series Manager.
  - Viewing the Key Properties
    This section describes how to view the properties of keys on iLOQ 5 Series Manager.
  - Adding Keys
  - Editing Keys
  - Ordering Keys
  - Programming Keys
    - Programming S5 Keys and S50 Key fobs
      This section describes how to program S5 keys and Key fobs on iLOQ 5 Series Manager.
    - Programming RFID Credentials
      This section describes how to program RFID credentials on iLOQ 5 Series Manager.
  - Attaching Keys to Persons
  - Returning Keys
  - Fetching Audit Trails from Keys
  - Fetching the Key Software Version
    This section describes how to fetch the key software version to iLOQ Manager.
  - Main Zone of the Key
  - Key Expiry Interval for S50 Key fobs and Phone keys
  - Automatic Key Renewal
  - Managing Key PIN-codes
    This section describes how to manage key PIN-codes on iLOQ 5 Series Manager.
  - Sending an Administrative Message to S50 Phone key
    This section describes how to send an administrative message to a Phone key.
  - Re-activating an Existing Phone key
    This section describes what to do when an already programmed Phone key must be re-activated.
  - Blocking Keys
    This section describes how to block keys on iLOQ 5 Series Manager.
  - Hidden Keys
  - Deleting Keys
    This section describes how to delete keys on iLOQ 5 Series Manager.
- Persons
- Blocklist
  This section provides an introduction to the blocklist.
- Floor Plans
- Programming Key Content
- Access Rights
- Time Profiles
- Person Roles
  This section provides an introduction to person roles.
- Reporting
- Programming keys
- Network Module
- Working with Key programming Hot Spots
- Users
- Browsing the Locking System Event Log
  This section describes how to browse the locking system event log on iLOQ 5 Series Manager.
- Estates
  This section provides an introduction to estates.
- Zones
  This section provides an introduction to zones.
- Editing Locking System Information
- Batch Operations
- Help Functions
- Calendar Controlled Doors
- Monitored Doors

Programming Keys

There are two key programming scenarios:

You can program one or more keys immediately at hand, by using an online iLOQ 5 Series Manager and the Programming key. You can carry out this procedure for a new or an existing key.

If this is the case, see Programming S5 Keys and S50 Key fobs.
You can remotely program keys through a Key programming Hot Spot. You can carry out this procedure for an existing key only.

If this is the case, see Ordering S5 Keys and S50 Key fobs.