Adding Calendar Controlled Doors

This section describes how to define a relay, connected to control an electric lock, as a calendar controlled door, on iLOQ Manager software.

Proceed as follows.

  1. Select Administration > Browse network modules.

  2. Select the network module, which has the relays connected.
  3. Right-click to select Edit relay settings.

    The Edit network module relay information window is opened.

  4. Select the Relays tab.
  5. Check the Calendar controllable relay check box for the relays that you want to define as a calendar controlled door.
  6. Enter a Door name for the relay.

    This is the name that will be shown in the Calendar controlled doors grid view.

  7. Select Save and close.