Viewing Calendar Controlled Door Properties

This section describes how to view the properties of a calendar controlled door on iLOQ Manager.

Proceed as follows.

Select Additional data > Calendar controlled doors.
Double-click the selected door.
The tabs are:
- Basic information — The fields are:
  - Network module name — This field indicates the network module name to which the Door Module is connected.
  - Door name — The name of the calendar controlled door.
  - Relay number — The number of the output relay, which this calendar controlled door controls.
  - Door module serial number — The serial number of the Door Module.
  - The following information refers to lock information, if the door module is programmed as a lock, and it controls the same relay as the calendar.
    - Placement — This column contains the placement information of the lock.
    - Locking target — This column contains the locking target information of the lock.
    - Door module serial number — The serial number of the lock, that is, the Door Module.
  - Relay type — This value is always Relay.
- Calendars — This tab contains the calendars attached to control the door. The columns are:
  - Calendar name — The names of the calendars attached to control the door.
- Type — This tab contains the calendar type. See Calendar Controlled Doors.
- Lock — This tab contains lock information, if the door module is programmed as a lock.
- Door audit trail — This tab contains the event log on the calendar controlled door relay. The columns are:
  - Index — The consecutive event number. The possible lock event index numbers refer to the lock audit trail event numbers.
  - Point of time — The time when the event took place.
  - Event type — The type of event.
  - Duration — Duration of the calendar control.
  - Source — The controlling source, such as a calendar name or lock placement.