Viewing Monitored Door Properties

This section describes how to view the properties of a monitored door on iLOQ Manager.

1. Select Additional data > Monitored doors.
2. Double-click the selected door.

   The tabs are:

   • Basic information — The fields are:

     • Network module name — This field indicates the network module name to which the Door Module is connected.

     • Door name — The name of the monitored door.

     • Relay number — The number of the input to which the door contact is connected.

     • Door module serial number — The serial number of the Door Module to which the door contact is connected.

     • Relay type — This value is always Switch.

   • Door audit trail — This tab contains the event log on the monitored door. The columns are:

     • Index — The consecutive event number.

     • Point of time — The time when the event took place.

     • Event type — The type of event.